If you undersize a refrigeration system, your product will spoil during peak summer. If you oversize it, you will waste thousands of rupees on unnecessary electricity and equipment costs. Accurate cooling load calculation is the most critical step in cold storage engineering.
Here is the step-by-step engineering methodology we use at Cold Matrix Advanced Solutions to determine the exact cooling capacity (in BTU/hr or Tons of Refrigeration) required for a facility.
This is the heat transferring from the hot outside environment into the cold room through the walls, ceiling, and floor. To calculate this, you need the surface area of the room, the thickness of your PU/PIR sandwich panels, and the temperature difference (Delta T) between the ambient outdoor temperature and the target indoor temperature.
Pro Tip: In cities like Karachi, we always calculate this using a peak summer ambient temperature of 45°C to 48°C to ensure the system can handle the worst-case scenario.
The product load is the heat that must be removed from the items being stored. This is usually the largest load and requires calculating different types of heat:
Every time a worker opens the cold room door to load or unload goods, hot outside air rushes in, bringing both heat and moisture. We calculate this using the room volume and the estimated number of "air changes per day."
Engineering Tip: Installing heavy-duty PVC strip curtains or fast-acting sliding doors drastically reduces this load and saves power.
Heat is generated from inside the room by:
Once you have added up all the above loads, you must add a 10% to 15% Safety Factor. This accounts for:
Only after adding this safety factor do you select your condensing units and evaporators.
Calculating all these variables manually can lead to costly errors. Try our free, professional Cold Storage Calculator to get accurate room dimensions, panel requirements, and cooling loads in seconds.
Use the Free Calculator →